fbpx
Select Page

LoadMatch Circulators

LoadMatch Circulators

Taco LoadMatch ® Circulators are designed for quiet, efficient operation on LoadMatch ® Fan Coil Heating and Cooling Systems. Each circulator includes a removable Integral Flow Check (IFC ®) to prevent gravity flow and reduce installation costs. An anti-condensate baffle prevents the build up of condensate on the motor windings when pumping chilled water. The unique, field serviceable cartridge contains all moving parts. Replacing the cartridge rebuilds the circulator. With no mechanical seal, the self-lubricating, maintenance-free design of the LoadMatch ® Circulators provides unmatched reliability.

Catalog
Instruction Sheet
Submittal Data
Specifications
Commercial Brochure

LoadMatch® System

A LoadMatch® system is the marriage of two old ideas wrapped around a new technology. The old ideas are single pipe distribution and primary-secondary pumping. The new technology consists of the use of maintenance-free wet rotor circulators. The primary distribution system is a single pipe loop; the secondary distribution system is a decoupled secondary piping loop for each terminal unit in the system. The wet rotor circulator provides the specified flow to each terminal unit at all times. The simplicity of the Load-Match® concept allows you to specify one size of pipe for large portions of the system. In single loop installations, there is no limit to the number of coils you can install. Final pipe size is determined by the total load of the loop and ∆T. If your loop is heavily loaded, it’s practical to split the system into two loops with smaller pipe sizes. This change saves installation costs, energy, and money, and can reduce pump head, and lower hp. When loops are carrying equal loads and arranged symmetrically, they will nearly self-balance. The resulting configuration will keep balancing losses down and will lower ongoing energy costs.

Learn More

Find your Taco Sales Representative
Click below to get in touch with your local Taco supplier:
Find a Rep
We’re Here to Help
Support is only a click away! Our dedicated customer service and tech support teams are waiting to hear from you.
Support
Performance Data

Min. Fluid Temp.: 32º F (0º C)
Max. Fluid Temp. Cast Iron or Stainless Steel: 230º F (110º C)
Max. Fluid Temp. Bronze: 220º F (104º C)
Max. Working Pressure: 200 PSI
Available in 115V, 230V or 277V voltages
Optional 0-10V variable speed control
Connection Sizes: 3/4″, 1″, 1-1/4″, 1-1/2″ Flanged, 3/4″ Sweat

Features
  • Integral Flow Check (IFC)–Eliminates In-Line Flow Check, Reduces Installed Cost, Easy to Service
  • Improved Performance vs. In-Line Flow Checks
  • Exclusive Anti-Condensate Baffle (ACB)—Protects motor windings against condensate build-up in chilled water systems
  • Unique Replaceable Cartridge Design—Field Serviceable
  • Unmatched Reliability—Maintenance Free
  • Quiet, Efficient Operation
  • Direct Drive – Low Power Consumption
  • Standard High Capacity Output
  • Compact Design
  • Self Lubricating
  • No Mechanical Seal
Applications
Models & Related Documents

Bronze & Stainless Steel Models

Pin It on Pinterest